Skip to content
RMM+ CVE-2026-127063: Disable the ScreenConnect Extension

RMM+ CVE-2026-127063: Disable the ScreenConnect Extension

November 13, 2026

Disable DataComm’s third-party RMM+ extension on on-premises ScreenConnect deployments. ConnectWise’s disclosure, dated November 12, 2026, rates CVE-2026-127063 9.3 Critical under CVSS 4.0. RMM+ uses a configurable API secret with a static default. Deployments retaining that default may accept unauthorized extension API requests, including requests to send commands to managed agents.

The ConnectWise-issued CVE record lists all extension versions as affected. This issue is specific to RMM+: deployments without the extension are unaffected, and ConnectWise says ScreenConnect server and client software are not affected. A ScreenConnect version number alone cannot establish RMM+ exposure.

Check each deployment

On systems you own or are authorized to manage, use administrative access to inspect each deployment’s extension inventory for DataComm RMM+. Record whether it is installed and enabled, along with the hosting model. Keep the API secret out of tickets and logs. Do not send test requests using the default secret.

For cloud-hosted ScreenConnect, ConnectWise says it has disabled and removed the affected RMM+ extensions and that no customer action is required. Its on-premises instruction is to disable RMM+ immediately and verify that it remains disabled. Do not postpone that step while investigating the secret’s history; the disablement guidance is not limited to administrators who have confirmed a default value.

Disable and verify

Disable RMM+ through the deployment’s supported extension controls. Reopen the extension inventory after applying the change and confirm that RMM+ remains disabled. Record the deployment, verification time, and observed state in the change ticket. Repeat this check for every on-premises deployment and after a restore or other maintenance that could reinstate an earlier configuration.

The vendor disclosure checked on November 13, 2026 states that no fixed RMM+ version has been announced. Do not re-enable or reinstall the extension pending further guidance. Changing its secret or updating ScreenConnect itself is not a substitute for that instruction. Check ConnectWise’s advisories before planning any return to service.

Preserve available ScreenConnect audit records and managed-endpoint telemetry. Review unexpected commands against approved administrative activity and escalate suspected misuse through your incident-response process. A disabled extension does not establish whether it was misused earlier. The disclosure does not report active exploitation.

Check the saved CVE evidence on Linux

For a change ticket, this offline check extracts the rating source and version scope from a saved CVE JSON record. Save that record as CVE-2026-127063.json and the following source as summarize_rmm_plus_cve.py in the same directory. It reads the JSON only, makes no network requests, and needs Python 3 with no additional packages.

import json
from pathlib import Path

record = json.loads(Path("CVE-2026-127063.json").read_text(encoding="utf-8"))
if record["cveMetadata"]["cveId"] != "CVE-2026-127063":
    raise SystemExit("Wrong CVE record")
cna = record["containers"]["cna"]
rating = next(item["cvssV4_0"] for item in cna["metrics"] if "cvssV4_0" in item)
print("CVE:", record["cveMetadata"]["cveId"])
print("Published:", record["cveMetadata"]["datePublished"])
print("Rating source:", cna["providerMetadata"]["shortName"])
print(f"CVSS {rating['version']}: {rating['baseScore']} {rating['baseSeverity']}")
for product in cna["affected"]:
    print(f"Product: {product['vendor']} {product['product']}")
    for version in product["versions"]:
        print(f"Version entry: {version['version']} ({version['status']})")

Run it from that directory:

python3 summarize_rmm_plus_cve.py

Actual output from Linux with Python 3.12.14 on November 13, 2026:

CVE: CVE-2026-127063
Published: 2026-11-12T17:50:07.196Z
Rating source: ConnectWise
CVSS 4.0: 9.3 CRITICAL
Product: DataComm RMM+
Version entry: All extension versions (affected)

The command exited with status 0. It checks saved advisory data and cannot establish an installation’s exposure or mitigation status. No ScreenConnect or RMM+ instance was installed, contacted, or tested. The command creates no files; remove the saved JSON and Python files when no longer needed. A later record revision may produce different output.

Acknowledgements

This post was created with assistance from AI.

Last updated on