CVE-2026-109445: Check PLANET switch firmware against the vendor fix
Restrict web-management access to trusted networks on PLANET GS-5220-8P2T2S switches with hardware version 3.0, then obtain the vendor-approved firmware update. PLANET’s November 13, 2026 advisory identifies 3.2412b261022 as the fix for CVE-2026-109445 and rates it Critical: CVSS 4.0 9.3, CVSS 3.1 9.8. The advisory gives a disclosure date, without an exact time.
The flaw is a stack buffer overflow in web-management cookie handling. An unauthenticated attacker with access to that interface can corrupt memory. PLANET describes a researcher demonstration in QEMU and possible management disruption or denial of service. It explicitly says remote code execution on physical hardware has not been confirmed. Its reported physical-device patch test is vendor evidence; no switch was tested for this post.
Resolve the firmware discrepancy
PLANET confirms 3.2412b251216 is affected and says other unpatched builds may also be affected. The VulnCheck CNA record instead describes versions before 3.2412b261008 as affected. That earlier boundary does not match the vendor’s listed fix, 3.2412b261022. Do not close a remediation ticket solely because a device meets the CNA boundary.
The vendor page lists a patch and reports successful verification, but also tells customers to install it once available on the official website. Download availability was not verified for this post. Ask PLANET or your distributor for the correct image and upgrade instructions for hardware V3.0, including confirmation of any replacement build. Do not install an image intended for another hardware revision.
Triage a local inventory on Linux
Record the model, hardware revision and running firmware from your authorized management interface or asset inventory. This offline helper uses exact matches because these custom firmware labels should not be treated as ordinary semantic versions. Unknown builds remain open for review, including the conflicting CNA boundary.
Save this synthetic example as planet-inventory.csv:
asset,model,hardware,firmware
lab-old,GS-5220-8P2T2S,3.0,3.2412b251216
lab-cna-boundary,GS-5220-8P2T2S,3.0,3.2412b261008
lab-vendor-fix,GS-5220-8P2T2S,3.0,3.2412b261022
lab-unknown-hw,GS-5220-8P2T2S,,3.2412b261022Save review-planet-inventory.py:
import csv
from pathlib import Path
import sys
with Path(sys.argv[1]).open(newline="", encoding="utf-8") as source:
reader = csv.DictReader(source)
required = {"asset", "model", "hardware", "firmware"}
if not required.issubset(reader.fieldnames or []):
raise SystemExit("Missing required inventory columns")
for row in reader:
if row["model"] != "GS-5220-8P2T2S" or row["hardware"] != "3.0":
result = "Scope unconfirmed; check model and hardware"
elif row["firmware"] == "3.2412b261022":
result = "Vendor-listed fixed build; verify running device"
elif row["firmware"] == "3.2412b251216":
result = "Vendor-confirmed affected; arrange update"
else:
result = "Unverified build; ask PLANET before closing ticket"
print(f"{row['asset']}: {result}")Run it from the directory containing both files:
python3 review-planet-inventory.py planet-inventory.csvActual output on Debian 13 with Python 3.12.14:
lab-old: Vendor-confirmed affected; arrange update
lab-cna-boundary: Unverified build; ask PLANET before closing ticket
lab-vendor-fix: Vendor-listed fixed build; verify running device
lab-unknown-hw: Scope unconfirmed; check model and hardwareThe helper reads local CSV only. A matching firmware label is a triage result, not a test of patch installation or resistance to attack. It does not classify other models or hardware revisions as safe. Replace the synthetic rows with inventory you are authorized to inspect; keep the full firmware string.
Update and verify without a crash test
Keep the management interface off public networks and restrict it to the administrators who need it while arranging the update. A stronger password alone cannot remove an unauthenticated memory-corruption flaw.
Back up the configuration and schedule the firmware change around the traffic and powered devices that depend on the switch. Follow PLANET’s upgrade procedure. After the update and any required restart, read the running firmware and hardware revision again, check configuration retention and normal switching/PoE operation, and record the approved image version in the remediation ticket. Retain the management-access restrictions.
Do not send oversized cookies to a production switch to check the fix. The local example neither contacts a device nor verifies that it was never compromised. PLANET’s advisory also covers the separate CVE-2026-2336; it is not an alias for this buffer overflow.
When finished with the synthetic example, remove only its two files:
rm -- planet-inventory.csv review-planet-inventory.pyNVD: CVE-2026-2336.
This post was created with assistance from AI.