NetScaler CVE-2026-107409: Patch DNS-over-HTTPS deployments
CVE-2026-107409 is a double-free memory-corruption issue in DNS-over-HTTPS (DoH). Citrix describes unpredictable or erroneous behavior, or denial of service. Bulletin CTX697305, initially published November 12, 2026, assigns a CVSS 4.0 score of 9.3 (Critical).
The precondition is NetScaler configured for DNS load balancing over HTTPS. Review SSL LB and CS virtual servers with DoH enabled. The stated precondition does not require recursive DNS resolution. The bulletin covers customer-managed appliances, including applicable Secure Private Access Hybrid instances; Citrix handles its managed cloud services and Adaptive Authentication.
Select the correct firmware
The bulletin lists these first fixed builds. Earlier builds in each listed branch are affected when the configuration precondition is met:
| Product and branch | First fixed build |
|---|---|
| ADC and Gateway 14.1 | 14.1-73.57 |
| ADC and Gateway 13.1 | 13.1-64.39 |
| ADC 14.1-FIPS | 14.1-73.58 FIPS |
| ADC 13.1-FIPS and 13.1-NDcPP | 13.1-37.293 |
Use the matching build or a later supported release in that branch. Record the edition; standard and FIPS thresholds differ. The bulletin lists supported branches only, so an omitted older release is not evidence of safety.
Inspect a local configuration fixture
In a fresh working directory on Linux, save this synthetic example as synthetic_netscaler_107409.conf. It contains no production data and must not be applied to an appliance. You can remove the fixture when finished.
# Synthetic inventory fixture; do not apply to an appliance.
add cs vserver sample_doh SSL 192.0.2.30 443 -dnsOverHttps ENABLED
add cs vserver sample_https SSL 192.0.2.31 443Run this read-only check from Bash in the same directory; it requires awk:
awk '
$1 == "add" && ($2 == "lb" || $2 == "cs") &&
$3 == "vserver" && $5 == "SSL" &&
/-dnsOverHttps[[:space:]]+ENABLED([[:space:]]|$)/ { count++ }
END { print "DoH-enabled virtual-server declarations:", count+0 }
' synthetic_netscaler_107409.confObserved on Debian 13 with mawk 1.3.4 on November 13, 2026, exit status 0:
DoH-enabled virtual-server declarations: 1Citrix’s LB example in this CVE’s instructions spells the option -dnsoOverHttps; its CS example and other DNS instructions use -dnsOverHttps. The fixture follows the CS example. Verify actual DoH settings on the appliance instead of relying on a literal search for the misspelling. This small check misses settings supplied by later set commands and cannot prove absence or patch status.
Upgrade and verify the service
Follow the vendor’s prerequisites: check platform compatibility and licensing, save and back up the configuration and required custom files, and prepare recovery access. Obtain the matching firmware from NetScaler. In the standalone GUI procedure, use System > System Upgrade, resolve pre-upgrade validation issues and complete the reboot. For an HA pair, upgrade the secondary first, fail over under the documented procedure, then upgrade the original primary.
After the upgrade, record the running edition and build on every node. Check the DoH virtual server, TLS certificate and backend health. Use an existing authorized client to check normal HTTPS DNS resolution. Verify HA state and synchronization separately. Ordinary HTTPS availability alone does not establish that the DoH service recovered.
The CVE Program API returned HTTP 404 during November 13 checks; the disclosure date and rating here come from Citrix. The bulletin does not establish remote code execution or active exploitation. No appliance or exploit was tested for this article.
Acknowledgements
This post was created with assistance from AI.