CVE-2026-133680: replace unsupported D-Link DCS-935L cameras
VulDB’s CNA dates disclosure of CVE-2026-133680 to November 20, 2026. It lists D-Link DCS-935L firmware 1.10.01 as affected and assigns Critical scores of 9.9 under CVSS 3.1 and 9.4 under CVSS 4.0. VulDB CNA record
D-Link’s legacy product catalog records the DCS-935L’s end of support as March 31, 2020 and recommends retiring and replacing unsupported products. The November CVE disclosure does not change that earlier support status. There is no verified firmware correction for this CVE. D-Link legacy product catalog
Inventory before replacement
Confirm the exact camera model and installed firmware through normal administration or asset records. The CNA’s explicit affected entry is 1.10.01; do not use that single entry to declare other firmware revisions safe.
Plan replacement with a supported product through the responsible owner. Preserve any recordings and configuration information required by the site’s retention and replacement procedures. Arrange the cutover so that required monitoring responsibilities are accounted for.
Decommission the old installation
After the supported replacement is operating, remove the retired camera’s network and account access through normal administration and update the asset inventory. Follow the organization’s procedure for retained recordings and disposal.
Do not install unofficial firmware or test the camera with attack traffic to establish safety. If replacement cannot be completed immediately, obtain vendor or qualified support guidance and keep the unresolved device visible in the maintenance record.
Acknowledgements
This post was created with assistance from AI.